Tensile Strength Machine (UTM)
Tensile Strength Machine (UTM)
Tensile Strength Machine is used to do tensile, peel, shear, bend, and other tests of materials.
- ISO 20344 | ASTM D2061 |ISO 22776
- Meet ISO, DIN, GB, BS, EN, ASTM and etc.
Tensile Strength Machine is used to test material tensile strength by pulling the sample at a constant speed and to know sample ultimate tensile strength at its breaking point. Tensile strength machine is applicable for shear, compression, elongation and other tests of fabric, footwear, leather, plastic, rubber, paper, textile, yarn and etc. So tensile testing machine is also called as Universal Testing Machine (UTM).
- Computerized universal testing machine. Display test curve. Different test standards can be chosen from operation software.
- UTM tester motor: Panasonic servo motor or equivalent
- Load cell: Celtron or equivalent
- Speed: 0-500mm/min or 0-1000 mm/min (speed can be set)
- Ball Screw rod: Can withstand more force than the ordinary screw. Ensure the UTM would run more stable, with less noise, and have higher accuracy.
- Emergency stop function
- Capacity: max 30T can be customized
- Stroke: can be customized
- Grip: can be customized according to your test standards
| Model | RT-UTM |
| Capacity | 50N, 500N,1KN,10KN,20KN (Optional) |
| Serve motor | Panasonic |
| Load cell | Celtron |
| Force measure range: | 0.2%～100%FS |
| Load accuracy | ±0.5% |
| Decomposition degree of load | 1/200,000 |
| Deformation measurement range | 0.2%～100%FS |
| Deformation indication relative error | Within ±0.5 of indication value |
| Walking space（without grip） | 1100mm |
| Effective width | 410mm |
| Test Speed | 0.01-1000mm/min |
| Crossbeam Speed relative error | Speed < 0.01,
error = within setting value ±1.0% |
| Speed ≥ 0.01mm/min,
error = within setting value ±0.2% |
|
| Speed accuracy | ±0.5% |
| Displacement resolution | 0.001mm |
| Data recording frequency | 200times/sec |
| Power | 1 phase 220V, 50/60hz |
